Nyheder

Mar 12, 2018 Læg en besked

 

1. Confirm workpiece type that you need to heat, select a series of

2. Measure the size range of the heated workpiece to select the heating model. If you need to heat bearings, then we only need to determine the minimum bearing inner diameter and the maximum outer diameter range; if we need to heat the motor end cover, etc., we need to provide the workpiece model and the inner diameter range; most of the required heating The workpiece is selected considering the parameters such as inner and outer diameter and width.

3. For non-standard special workpiece or special heating needs, need to know the workpiece material, workpiece size, interference requirements, the required heating temperature.

 

 amy@wtr-bearing.com or calling 008618562800715. 


Send forespørgsel